Report item
Item specifics
  • Model Number: 4G Booster
  • Frequency:: uplink 2500-2570MHz downlink 2620-2690MHZ
  • Gain:: 65dB
  • Max Outputpower:: 20dB
  • Power supply:: AC:110-220V DC:5V
  • ues phone antenna amplifier :: distribution amplifier
  • 4g Repeater :: 4G signal booster
  • 4g signal repeater :: 4G Amplifier
  • booster amplifier : : cell phone signal booster
  • repetidor de sinal de celular booster: FDD LTE 4G 2600MHz Repeater
  • gsm 2600mhz repeater:: 4G cellular signal booster
Product Description

Dear buyers,

Before buy a 4G booster ,please check with operator to ask what bands ( frequency )  exactly they use for your area , because too many different frequency for 4G to use, even a same operator may now use same band ( frequency ) in different areas  .

So please check it before buy to avoid wrong buy or complain lately by saying product not works ,because 4G is not as simple as 2G or 3G booster .

Details about different bands for 4G



Lintratek ! Gain 65dB Mobile Signal Booster Repeater 4G LET 2600mhz Cell Phone Amplifier LTE Phone Signal Extender Full sets + outdoor antenna with 10m cable + 2 x indoor antenna with 3m cable +power splitter  +1m cable










 Parameter data                       

                                                    Uplink                             Downlink
Frequency Range   :          2500 ~ 2570mhz             2620 ~ 2690MHz
                        Gain :                  60±2                                 65±2dB
Output Power(po)  :                      ≥20dBm
flatness :                                       ≤3dB
Noise factor   :                              ≤4db
Transmission delay:                     ≤0.5
Power Supply :         AC110V-220V  to  DC5V 

Impedance  :              50 ohm

Usage : Indoor

Package :

1X 4G 2600MHZ booster ;
2X Indoor antenna  ;
1X Outdoor antenna;
2X 3 meter cable;
1X 10 meter cable;
1X 1 meter cable;
1X power splitter;
1X Instructions;
1.We send EU adapter. If you need additional adapters, please leave a message, thank you!
2.Cable have black and white, the color randomly send.




 Installation steps

1 around the use of mobile phones on the top of the building or to find the direction and position of the strongest signals, as the location of the installation outside antenna

2 after selecting the appropriate position will indoor ah you fixed on the wall or support
3 in related indoor location choosing appropriate location (this site for nearly power supply and outdoor antenna side rain sunscreen and well ventilated for best location) install indoor machine and fixed on the wall or support
4 will be introduced to the outside antenna is suing (OUTDOOR) interface links at this point and OUTDOOR antenna and indoor amplifier
May determine the installation position of indoor antenna fixed antenna
6 INDOOR antenna and received the INDOOR antenna amplifier connection end interface on the other end of receiving repeater machine INDOOR (INDOOR) port

Mobile signal amplifier installation considerations:

1, outdoor antenna installation location must be able to clear on the phone, the installation must be level yagi.

2, eight wood and the distance from the antenna suction a top as far as possible, more than 8 meters, not in the same line of sight range, lest cause self-excited, typical generally use a wall for isolation, the effect is good.
3, 75-5 coaxial line is usually F head through to the host, should be an absolute guarantee F head fastening, recommend the use of 75-7 coaxial feeder effect is obvious.
4, F head must be for 75-5 inch line 75-5 coaxial line should also form a complete set, can appear otherwise can\'t install.

Question answer:

1, mobile phone signal amplifier can produce radiation, affect the body health?

A: definitely not.Power is not big, because the downlink power output is only about 500 mw, the relative maximum transmitted power of GSM mobile phone, only 1/20, very small.

2, have electricity, two lights are not bright??
A: very likely ac power supply is unreliable, suggest change the socket.

3, signal full, can\'t call, but can come in, what\'s the problem?
A: the reason for the mobile launch of signal transmission to the base station can not be a good cause, for many reasons, generally can be adjusted through the yagi direction, such as rotate 360 degrees, choose a good point of view, fixed again.If still can\'t solve, you can consider whether or not the connection and joint is too long, or loose, and tighten in place.General section of line no more than 20 meters suitable outdoor, indoor section of the line is not more than 10 meters.

Scope of application:

1) signal blind area of small area or weak signal area: such as underground or semi-underground place of business, small basement, underground parking, etc

2) small hot signals complaints area: such as conference room, small supermarkets, shopping malls, office rooms and small public areas, etc
3) traffic and social influence of big area: bars, Internet cafes, dance halls, cafes, fitness clubs, leisure entertainment, etc
4) elevator, especially in the elevator shaft inconvenient to lay cables of the elevator
5) family, office, luxurious yacht, car, * * system and road safety?Fei miaotuo magpie?
6) there is no signal within a large workshop

Function characteristics:

1) high gain of linear power amplifier

2) automatic level control
3) low noise receiving amplifier
4) there is no disturbance to the base station, opening without need of the original system and the base station parameter to adjust
5) stable and reliable electromagnetic compatibility design
6) do not cause the increase of base station background noise, will not lead to a drop in the quality of base station communication
7) in full-duplex communication way
8) cooling effective and reasonable, beautiful structure, volume is appropriate

Packaging Details
  • Unit Type: piece
  • Package Weight: 2.0kg (4.41lb.)
  • Package Size: 20cm x 20cm x 30cm (7.87in x 7.87in x 11.81in)
Calculate your shipping cost by country/region and quantity.
Quantity: Ship to:
Packaging Details
  • Unit Type: piece
  • Package Weight: 2.0kg (4.41lb.)
  • Package Size: 20cm x 20cm x 30cm (7.87in x 7.87in x 11.81in)
We support the following payment methods. All payments made on AliExpress are processed by Alipay.